Licensed Panel Specialists · NV C-2 #74758

Electrical Panel Brands We Install & Service in Las Vegas & Henderson

From smart Span panels to legacy Cutler Hammer boxes in older valley homes — Penny Electric installs, repairs, and replaces the major residential and commercial panel brands so your work matches the equipment already on your wall.

NV C-2 #74758 24/7 Emergency $950K Bid Limit
Get a Free Quote Call 702-279-6040
Why It Matters

The Panel Brands We Work With

Not every electrician stocks parts or training for every panel manufacturer — and a mismatch between your existing brand and the tech sent to your door leads to return trips, wrong breakers, and failed inspections. Penny Electric installs and services all major residential and commercial panel brands, so you are not locked into one manufacturer and repairs fit the equipment already in your home or business.

Whether you are upgrading capacity, replacing an obsolete box, or troubleshooting a tripping breaker, we match the right brand and breaker type to your project — not whatever happens to be on the truck. This page outlines the five panel families we work with most often across Las Vegas and Henderson.

This work is part of our complete electrical panel services for Las Vegas and Henderson homes and businesses — licensed, permitted, and code-compliant.

Span Smart Panels

Span is a smart electrical panel — not just a breaker box with a label. Circuit-level app control lets you see real-time load, turn circuits on or off remotely, and prioritize backup power to refrigerators, HVAC, or EV charging when paired with solar and battery storage. We install Span as part of whole-home energy upgrades where monitoring and backup control matter. See our dedicated Span smart panel installation page for scope, pairing with Powerwall, and what changes when you replace a conventional panel with Span.

Siemens

Siemens panels are widely specified for both residential and light commercial work in the valley — known for straightforward layouts, dependable breakers, and good availability when you need to add circuits during a remodel. We install Siemens panels for standard capacity upgrades, garage sub-feeds, and replacement projects where the goal is a proven, serviceable box without smart-panel complexity. Breaker compatibility is well documented, which speeds repairs when a single circuit fails.

Square D (Schneider Electric)

Square D QO and Homeline lines are industry standards — QO for heavier residential and commercial duty, Homeline for cost-effective home panels. They show up constantly in Las Vegas tract homes, Henderson additions, and investor flips because parts are everywhere and electricians know the line. When your existing panel is Square D, we source matching breakers and bus hardware for repair; when it is failing, we replace like-for-like or upgrade within the Schneider family so your service history stays consistent.

Eaton

Eaton manufactures current-generation residential and commercial panels and the BR/CH breaker lines common in newer Clark County builds. You will see Eaton on recent custom homes, townhome clusters, and small commercial suites where builders standardized on BR series breakers. We install new Eaton panels for upgrades and handle breaker replacements when a CH or BR breaker will not reset — including matching series when an exact SKU has been revised.

Cutler Hammer

Cutler Hammer is the legacy brand many older Las Vegas and Henderson homes still have — often on panels decades past their ideal service life. Eaton owns the line today, but the name on the door still matters for breaker compatibility. We service and replace older Cutler Hammer equipment, including obsolete-breaker situations where big-box stores no longer stock the right trip rating. When replacement is safer than hunting discontinued parts, we walk you through modern Eaton or Square D options that fit your load and budget.

What's Included

Not Sure What Panel You Have?

  • On-site identification of panel brand, series, and main breaker size
  • Visual assessment of bus condition, labeling, and code issues
  • Clear recommendation: repair breaker, upgrade capacity, or full replacement
  • Permitted work with inspection when panel or service changes are required

The brand badge inside the door or on the main breaker is not always obvious — and two panels that look similar can use incompatible breakers. We identify your equipment during a service call or estimate visit, then tie the recommendation to our electrical panel services — whether that is a targeted circuit breaker repair, a panel upgrade for more capacity, or full panel replacement when the box itself is the problem.

Older Cutler Hammer and Federal Pacific–era panels deserve an honest conversation about repair vs. replace — we will not sell you a full swap when a correct breaker fixes the trip, and we will not patch a panel that fails inspection or insurance review.

Why Choose Us

Why Penny Electric

Licensed NV C-2 #74758

Panel work is permitted, inspected electrical contracting — handled in-house by our licensed team, not a subcontractor learning your brand on the job.

All major panel brands

Span, Siemens, Square D, Eaton, and Cutler Hammer — install, repair, and replacement without limiting you to one manufacturer.

Repair or full replacement

We recommend the smallest safe fix first; when the panel or service entrance needs replacement, we quote the full scope upfront.

4.9★ Average Across 671+ Reviews

Trusted across Las Vegas and Henderson for honest panel work since 2008.

Request a FREE Estimate Today

Step 1 - Project Step 2 - Contact
What Type of Project?
Our Process

How It Works

  1. 01

    Identify

    We confirm your panel brand, series, amperage, and condition — and whether breakers, bus work, or full replacement is the right path.

  2. 02

    Recommend

    You get a clear option set: repair with matching breakers, capacity upgrade, smart Span install, or replacement with a modern brand — with pricing before work starts.

  3. 03

    Install / Service

    Work is completed to NEC and local code, permits pulled when required, and inspection coordinated so your panel is safe and documented.

Panel Brands FAQ

Do you work on older Cutler Hammer panels?

Yes. We service legacy Cutler Hammer panels common in older Las Vegas and Henderson homes, including breaker replacements when parts are still available. When breakers are obsolete or the bus is damaged, we recommend replacement and explain modern Eaton or Square D options.

Which panel brand is best?

It depends on your home, load, and goals — not a one-size-fits-all answer. Standard upgrades often use Siemens or Square D; newer builds may already be Eaton BR/CH; smart-home and backup priorities may point to Span. We help you choose based on inspection findings and plans for EV, solar, or additions — not a sales quota.

Can you match my existing panel brand for repairs?

When repair is the right call, we source breakers and parts matched to your existing brand and series — Square D with Square D, Siemens with Siemens, and so on. Mixing incompatible breakers in a panel is a safety and code issue we avoid.

Do you install Span smart panels?

Yes. We install Span panels for homeowners who want app-based circuit control and smart backup prioritization. See our Span smart panel installation page for pairing with solar, battery, and EV loads.

Are these brands available for same-week service?

Breaker repairs and many panel service calls can often be scheduled within the same week depending on parts availability and current job load. Larger upgrades and Span installs require permitting and ordering — we give you a realistic timeline when you request a quote.

Have a Question? Contact Us

Reach out about your project, a quote, or anything else - we'll get right back to you.

Contact Us

702-279-6040

Fax: (702) 586-3771

hello@pennyelectric.com

Phone answered at our Henderson main office.

Henderson Office (Main Office)

1987 Whitney Mesa Dr
Henderson, NV 89014

All staff, reception, and personnel.

Las Vegas Service Facility

3645 W Oquendo Rd Unit E
Las Vegas, NV 89118

Equipment and parts hub only

Hours

Send a Message